24 Inch Wall-Mounted Shutter Exhaust Fan – 7030 CFM Ventilation Unit

Move 7030 cubic feet of air per minute through your workspace with this 24-inch wall-mounted shutter exhaust fan. The integrated louvers remain flush and tight against the frame when idle, then pivot open automatically under motor pressure to clear hot, humid, or stale air without requiring external backdraft dampers.

Airflow Capacity and Room Fit

Rated at 7030 CFM, this ventilation fan covers unobstructed floor areas between 10,000 and 15,000 square feet when installed at standard commercial ceilings. The direct-drive motor pushes maximum volume at low RPM, reducing belt wear and conserving electricity compared to high-speed multi-blade units. Suitable for equipment bays, livestock shelters, packaging facilities, drying rooms, and utility structures.

• 24-inch diameter blades rotate on a sealed bearing assembly for continuous operation
• Heavy-gauge steel housing resists corrosion after repeated washdown or outdoor exposure
• Spring-loaded weather flap prevents dust, birds, and precipitation from entering through the intake

Mounting and Service Routine

Secure the fan to an exterior wall using the pre-drilled flange holes and appropriate fasteners for brick, concrete, or treated lumber. Maintain a clearance gap around the perimeter to prevent structural vibration transfer. Power the unit through a standard 120V grounded circuit with overload protection. Wipe away surface grime every three months and lubricate the pivot pins yearly to preserve full air movement.